LPG ambient air vaporizer is to vaporize low-temperature liquid gas (LO2, LN2, LAr, LCO2, LPG, etc.) The high-pressure vaporizer vaporizes the liquid oxygen, liquid nitrogen, and liquid argon pressurized by the cryogenic liquid pump into high-pressure gas to fill the steel cylinder. The gasifier is to vaporize the low-temperature liquid in the storage tank into low-pressure gas, which is transported to the use site through the pipeline through the pressure regulating device. Moreover, the structural characteristics of the gasifier can ensure the normal operation of all components at cryogenic temperatures, so as to avoid sealing and freezing, good sealing performance, non-corrosiveness, and long service life.
Principle of LPG ambient air vaporizer
The LPG ambient air vaporizer uses the atmospheric environment as a heat source, and conducts heat exchange through the LF21 star tube with good performance, so that each low-temperature liquid is vaporized into a gas at a certain temperature.
LPG air ambient vaporizer structure
1. The LPG vaporizer is mainly composed of star-shaped finned heat pipes, liquid-gas guide pipes, brackets, bases, inlet and outlet joints and other components.
2. The star-shaped finned heat pipe has eight fins and is symmetrical. The material option is LF21 anti-rust aluminum alloy, which is corrosion-resistant, weather-resistant, and vaporized well. , The bracket material option is angled LF21 rust-proof aluminum alloy, which is corrosion-resistant.
Features of LPG vaporizer
1. Using ￠120, ￠160, ￠200 large-diameter aluminum finned tubes, the defrosting speed is very fast.
2. The welds at the joints of LPG carburetor components are all welded by argon arc welding, the welds are neat and beautiful, and there is no pore defect.
3. Optimize the process design, reduce the pressure, avoid the phenomenon of bias flow, and ensure that the flow rate is controlled within the safe range.
4. Easy installation, easy maintenance, no energy consumption, green and environmental protection.
5. Working medium: LO2, LN2, LAr, LCO2, LPG, liquid acetone and other low temperature liquids.
6. Working pressure: 0.8-25Mpa
7. Vaporization capacity of a single unit: 20-2000m3/h
https://www.chinavaporizer.com/