Here are the correct methods to install and debug air ambient vaporizer:
Installation
Preparation: Check whether the equipment and accessories are complete and whether there is any damage. Confirm that the installation tools and protective equipment are ready.
Foundation installation: According to the size and weight of the equipment, pour a suitable concrete foundation to ensure that the foundation level and bearing capacity meet the requirements, install the anchor bolts and fix them.
Equipment in place: Use a crane and other equipment to smoothly lift the vaporizer to the foundation, adjust the pad iron and other equipment to make the equipment reach a horizontal state, and then tighten the anchor bolts.
Pipeline connection: Connect the liquid inlet, gas outlet, sewage and other pipelines according to the process flow, pay attention to the slope and direction of the pipeline, ensure that the connection is tight and leak-free, and install the pipeline bracket at the same time.
Installation of instruments: Install temperature, pressure and other monitoring instruments, and connect the lines.
Debugging
Appearance and connection inspection: Check whether the appearance of the equipment is damaged and whether the connection parts are tight.
Static debugging: Calibrate the instrument, check whether the control system is normal, set the alarm values of various parameters, etc.
Airtightness test: Fill the system with gas at a certain pressure, maintain the pressure and check for leaks.
No-load debugging: Start the fan and other auxiliary equipment to check whether the operation is normal.
Load debugging: Slowly pass the medium to observe whether the temperature, pressure, flow and other parameters of the vaporizer are stable and whether the vaporization effect is good.
If you have any questions or need more details about air ambient vaporizer, please feel free to contact us, we will serve you wholeheartedly!
https://www.chinavaporizer.com/