The following are the steps to correctly install and debug gasification pressure regulating skid:
Installation
Site preparation: Select a flat, solid and well-ventilated installation site to ensure that it can bear the weight of the equipment, and keep away from fire, heat sources and flammable and explosive items.
Foundation construction: Pour the concrete foundation according to the foundation drawings provided by the equipment manufacturer to ensure that the foundation horizontality error is within the specified range and the pre-buried anchor bolts are accurately positioned.
Equipment in place: Use a crane and other equipment to smoothly lift the pressure regulating skid to the foundation, adjust the pads to make the equipment level, and then tighten the anchor bolts.
Pipeline connection: Connect the import and export pipelines according to the process flow and design requirements to ensure that the pipelines are tightly connected and leak-free. At the same time, pay attention to the slope and support of the pipeline to avoid stress concentration.
Electrical connection: Professional electricians will connect the electrical lines, including power lines, signal lines, etc., to ensure reliable grounding and prevent electrical failures.
Debugging
Appearance inspection: Check whether the appearance of the equipment is damaged or deformed, and whether the connection parts are firm.
Pressure test: Close the outlet valve, slowly fill the pressure regulating skid with gas, perform pressure test, check the pressure resistance of each component, and observe whether there are any leaks.
Parameter setting: Set the pressure, flow and other parameters of the pressure regulating skid according to actual use requirements.
Operation debugging: Start the equipment, gradually increase the gas flow, observe the pressure regulation, and ensure that the outlet pressure is stable within the set range.
Safety protection debugging: Test the safety protection devices such as overpressure and underpressure to ensure that they can operate normally.
If you need high-quality gasification pressure regulating skid, please contact Scheele Energy Technology for more questions.
https://www.chinavaporizer.com/