Pay attention to the selection of the installation location of the LPG ambient air vaporizer, install it in a place with good ventilation, and follow the rules in the layout. The installation site should also be kept clean to facilitate inspection and maintenance after problems occur. Before installation, slogans such as no smoking and fireworks should be prepared to warn people. It is also necessary to equip a dry powder fire extinguisher near the installation, and it is forbidden to place any items that may burn around.
For the sake of safety, it is best to equip it with a device that can detect flammable gases around it. When the LPG vaporizer discharges gas regularly, it must be confirmed that there is no fire source around it to prevent the fire source from appearing, and a barrier should be erected between them to ensure safety. The control panel should be installed in the control room.
Before and after the operation of the LPG air ambient vaporizer every day, it is necessary to pay attention to check the water temperature in the furnace, and check whether there is pressure at the inlet and outlet of the liquid phase and gas phase. Use a detector to check for gas leaks. Check whether the switch of the valve is intact, and finally make sure that there is no gas emission.
Change the water in the furnace every year, cooperate with the local department to check the pressure gauge and other equipment, clean the heating coil regularly, and replace easily damaged objects in time, and finally conduct hydraulic pressure and air tightness tests on the equipment.
One year or two years after installation, an overhaul inspection is carried out, and then every three years. The main inspection is the inside of the air temperature vaporizer because many problems cannot be observed from the outside.
https://www.chinavaporizer.com/