The following precautions should be taken during the use of electric heated water bath vaporizer:
1. Installation and commissioning
The installation location should be selected in a well-ventilated, dry, flammable and easy-to-operate and maintain place. The installation foundation should be firm to ensure that the equipment will not shake or tilt during operation.
Strictly follow the equipment installation instructions for installation, and connect the import and export pipes, electrical lines, etc. After installation, a comprehensive inspection should be carried out to ensure that all connection parts are firm and reliable without leakage.
Before debugging the equipment, carefully check whether the electrical control system is normal and whether the insulation performance of the electric heater is good. During the debugging process, gradually increase the temperature, observe the operating status of the equipment, and ensure that all parameters meet the requirements.
2. Operation and operation
The operator should be professionally trained and familiar with the operation methods and safety precautions of the equipment. During the operation, the operation should be strictly carried out in accordance with the operating procedures, and the operating parameters of the equipment shall not be changed without authorization.
Before starting the equipment, check whether the water level in the water bath is normal and ensure that the water level is within the specified range. If the water level is too low, water should be added in time.
When turning on the electric heater, the temperature should be gradually increased to avoid damage to the equipment due to excessive temperature increase. At the same time, pay close attention to the pressure, temperature and other parameters of the equipment to ensure that the equipment operates within the normal range.
During operation, the operating status of the equipment should be checked regularly. If any abnormality is found, the operation should be stopped immediately for inspection and treatment.
3. Maintenance and care
Regularly maintain the equipment, clean the dust and dirt on the surface of the equipment, and keep the equipment clean.
Check the insulation performance of the electric heater. If it is damaged, it should be replaced in time. At the same time, check whether the heating tube of the electric heater is deformed, corroded, etc. If there is a problem, it should be handled in time.
Regularly check the safety valve, pressure gauge, temperature sensor and other safety devices of the equipment to ensure their normal operation. If there is any abnormality, it should be calibrated or replaced in time.
Regularly check the water quality in the water bath. If the water quality is found to be deteriorating, the water should be replaced in time. At the same time, the water bath should be cleaned regularly to remove impurities and dirt in the water.
4. Safety precautions
The electric heating water bath vaporizer is a special equipment. During use, relevant safety regulations and operating procedures must be strictly observed.
During the operation of the equipment, it is strictly forbidden to touch the electric heater and electrical circuit to avoid electric shock accidents.
It is strictly forbidden to stack flammable materials around the equipment to avoid fire accidents.
When repairing and maintaining the equipment, the power supply must be cut off first, and warning signs such as "Do not close the switch" must be hung on the equipment to ensure the safety of maintenance personnel.
If you want to know more about the precautions for using the electric heated water bath vaporizer, etc., please visit www.chinavaporizer.com!