The air ambient vaporizer is a device that turns liquid fuel through heating into gaseous fuel. The installation steps are as follows:
1. The installation location of the equipment should be outdoors or indoors that are good at ventilation, no light fire, and indoors.
2. Before installation, clean the installation position to ensure flat, barrier -free and debris.
3. Place the device on the installation position, and then select the appropriate support and fixing method according to the weight and installation requirements of the equipment.
4. Connect the air intake of the air ambient vaporizer and the gas pipeline to ensure the sealing of the pipeline.
5. Wiring the power supply of the device and connect the power cord to ensure that the power wiring is correct.
6. Connect the air pipeline, gas pipeline and electrical lines, and wiring in accordance with design requirements.
7. After completing all the connections, test. Eliminate the inspection of gas to ensure that the gas pipeline has no leakage. Then check the air pipeline to ensure that there is no leakage of the pipeline. Then check the electrical line to ensure that the wiring is correct and the electrical is normal.
8. If the test results are correct, you can start an empty vaporrian device for trial operation. Check whether the equipment is running normally and whether there are abnormal sounds and vibrations. If the device is normal, it can be formally put into use.
https://www.chinavaporizer.com/