LPG vaporizer is a device that converts liquid petroleum gas (LPG) into gaseous petroleum gas by heating. During the gasification process, the pressure within the equipment needs to be controlled to ensure that LPG can be gasified smoothly. The following is an introduction to the pressure control of the equipment:
1. Pressure gauge: Set a pressure gauge in the equipment to measure the pressure value inside the vaporizer. It can be adjusted based on the pressure gauge reading.
2. Protection valve: The equipment is equipped with a protection valve, which is used to automatically open for exhaust when the pressure is too high during the gasification process to avoid the danger caused by excessive pressure.
3. Pressure regulator: A pressure regulator is installed in the air inlet pipe of the LPG vaporizer to adjust the high-pressure LPG gas entering the equipment to an appropriate pressure to meet the pressure requirements inside the equipment.
4. Water bath type equipment: In water bath type equipment, the pressure inside the equipment is controlled by adjusting the water temperature. If the water temperature is too high or too low, it will affect the pressure inside the equipment, so the water temperature needs to be adjusted according to the pressure inside the equipment.
https://www.chinavaporizer.com/