LPG vaporizers are generally equipped with the following protective devices to ensure stable operation:
1. Pressure protection valve: used to prevent the internal pressure of the equipment from being greater than a reasonable range. When the pressure is greater than the set value, the pressure will be automatically released to protect the equipment from excessive pressure.
2. Flame monitor: used to monitor the flame condition inside the equipment. If the flame inside the equipment is abnormal or extinguished, the flame detector will sound an alarm and trigger corresponding protective measures.
3. Temperature sensor: used to monitor the temperature of the equipment. If the temperature rises abnormally, the temperature sensor will sound an alarm and trigger a protective device to prevent the device from overheating.
4. Gas leakage alarm device: used to detect gas leakage around the LPG vaporizer. Once a leak is detected, the air leak alarm device will emit a sound or light signal to remind the operator to take appropriate emergency measures.
5. Explosion-proof device: Since LPG is flammable, explosion-proof devices need to be installed inside the equipment to avoid accidents caused by gas leakage.
6. Overload protection device: used to monitor the load condition of the equipment. Once it exceeds the rated load range, the overload protection device will automatically disconnect the power supply or trigger an alarm to avoid overload damage to the equipment.
7. Electrical protection devices: including over-current protection, over-voltage protection, under-voltage protection, etc., used to protect the electrical system of the equipment from abnormal conditions such as excessive current, excessive voltage, or excessive voltage.
https://www.chinavaporizer.com/