When the temperature is low, the air ambient vaporizer will be frosting when the surface is running at night. If the frost is severe, the gasification device will be damaged. In the continuous work or the design of the equipment or the amount of the amount is greater than the gasification, the frost of the equipment is too late to melt.
And the pipeline of the empty temperature vapor does not heat up, runs cold, and the water vapor in the atmosphere is condensed and frozen. After a long time, the more ice is. The other is that there is a slight leakage of the pipe welding port, and a small amount of liquid causes freezing. There is also if icing starts with the pipeline, and the equipment freezes is only the lower part, so it should not be the problem of the equipment. It may be that there is a leak at the pipe or flange.
If the surface of the air ambient vaporizer is frost, it will greatly reduce work efficiency. If the device must be used for a period of time, you can use the temperature of the shower with normal temperature water. Or immediately shut down to check. After the ice is turned off, re -turn on the equipment to check whether there is any rustic pipeline. If you need to stop using it. In addition, the liquid valve should not be fully opened, and the liquid -phase pipeline should be kept insulated. If the above is eliminated, you need to consider replacing the vaporizer with a large heat exchange area.
https://www.chinavaporizer.com/