What causes the oil leakage problem of the vaporizer

A carburetor, commonly known as a carburetor, is a component used in an engine to form a combustible mixture of fuel and air, and is widely used in industrial and mechanical fields. The carburetor needs to use oil in the process of use, and it cannot run without oil, but many carburetor failures are related to oil, and oil leakage is one of the most typical failures.

If there is oil leakage in the carburetor, it should be closed, and then deal with it. This is a safer way. Generally speaking, the oil leakage situation may be due to unreasonable product design, because if the designer is designing If the sealing performance is not fully considered, or the design is not combined with the working conditions of the equipment, temperature medium and other conditions, then oil leakage will definitely occur.

In other cases, although the rationality of the designer's design has been achieved, the expected design has not been achieved in terms of manufacturing and processing. For example, the surface is too rough, and there are defects such as pores and sand holes during casting, which will cause oil leakage. The selection of sealing material is also very important for the carburetor. The sealing material needs to choose materials with good properties such as resilience, compressibility, wear resistance and softness, so as to achieve a good sealing performance.

In the process of using the carburetor, you should also pay attention to it. Improper operation, careless maintenance and management will cause oil leakage from the carburetor, including the installation of the carburetor. The manufacturer should choose professional personnel to install the carburetor, so that Avoid many unnecessary problems.

https://www.chinavaporizer.com/