News

The energy-saving liquefied vaporizer can fully vaporize and saturate the molecular bonds of the liquefied gas and then burn it, so as to achieve the effect of increasing the calorific value, incre...

According to the operation data of the LNG receiving station, in summer, the seawater flow rate of 7800t/h can meet the full load operation of 200t/h; in winter, the seawater temperature is low, an...

The air quality is poor, the sewage is not completely discharged, and the heavy components in the liquefied gas are coked, which gradually blocks the coil of the vaporizer, resulting in no gas.

The LNG gasification pressure regulating skid is a skid-mounted structure that integrates LNG unloading, storage tank pressurization, air temperature vaporizer, NG reheater, pressure regulation, me...

The process characteristics of LNG station are low temperature storage and normal temperature use. The design temperature of the storage tank reaches minus 196 degrees Celsius (the boiling point of...

The process characteristic of LNG gasification skid is "low temperature storage, normal temperature use".

Regularly check whether the outlet pressure of the regulator can meet the working requirements. If there is any abnormal phenomenon, check and maintain it in time.

The purpose of the selected pressure reducing valve, the operating conditions and the control method.

Clarify the use of the pressure reducing valve in the water bath vaporizer or device, and determine the working conditions of the valve: applicable medium, working pressure, working temperature, etc.

The connection pipeline between the liquid storage tank and the liquid oxygen carburetor must use stainless steel pipes that can be used in cryogenic conditions, and a filter should be installed.

The propane vaporizer uses the natural convection of air to heat the low-temperature liquid in the heat exchange tube, so that it can be completely evaporated into gas;

Liquid oxygen gasifiers are part of an engine used to form a flammable mixture of fuel and air and are widely used in industry and machinery.